TD-VG3631 VoIP SIP configuration manual

• Dear customers, we have created this instruction beacouse some of you would like to use your existing 300Mbps Wireless N VoIP ADSL2+ Modem Router with our network. Please follow the instrucion to configure your modem.
  
• Before configuration you need to have an active account with us.
• Make sure, that your modem is up and runnung:

  

• Type modem IP address in any internet browser from computer connected to the same router/network. Usually IP is 192.168.1.1
• Use admin/admin login and password by default.
• Select Voice > VoIP

• Click on Add to add a new account.
• Your login/password may be checked via MY ACCOUNT portal, SIP/IAX INFO page.
• Check your Device credentials:

• Example of Username/Password from SIP/IAX page under MY ACCOUNT.

• Please define next settings:

  Profile Name: Your Device Username (10023 from example above)
  Display Name: Your Device Username (10023 from example above)
  Authentication ID: Your Device Username (10023 from example above)
  Registrar Address: sip.australianphone.com.au
  SIP Proxy: sip.australianphone.com.au
  Outbound Proxy: 0.0.0.0

  Phone Number: Your Device Username (10023 from example above)
  Authentication Realm: -blank-
  Password: Your Device Password
  Registrar Port: 5060
  SIP Proxy Port: 5060
  Outbound Proxy Port: 5060

  Preferred Codec 1: G.711ALaw
  Preferred Codec 2: G.711MuLaw
  Preferred Codec 3: G.729a/b
  Preferred Codec 4: G.726_32

• Click Save Setting and you modem will be shortly restarted.
• Your modem is ready to use.
• Make a free 09002 test call